Legal
Licence Terms
The terms for every Skedula edition: version 2.4 for the business editions and the free evaluation pack, and version 1.0 for the Home Pack. Business editions are sold to businesses; the Home Pack is sold to households. The licensor is Stutterheim Technologies, UEN 53534754E. See also the refund policy and privacy notice.
Home Pack: the Home Pack Terms alone govern the Home Pack (plain-text version 1.0). The Master Licence Terms and the schedules below do not apply to it.
Business editions: the Master Licence Terms, with the schedule for the edition bought, govern the SME packs, the Complete SME Suite, the SME SDK Edition, the Corporate & BPO Edition and the Engineering SDK Edition.
- Home Pack Terms
- Master Licence Terms
- Schedule: SME Pack
- Schedule: Complete SME Suite
- Schedule: SME SDK Edition
- Schedule: Corporate & BPO Edition
- Schedule: Engineering SDK Edition
- Schedule: COBOL Experimental Target
- Free Evaluation Pack Terms
Home Pack Terms
SKEDULA HOME PACK TERMS Version 1.0 - Effective 8 November 2026 These terms cover the Skedula Home Pack. Please read them before you buy. The terms for Skedula's business editions (the Master Licence Terms and their schedules) do not apply to the Home Pack. 1. WHO WE ARE 1.1 Skedula is a product of Stutterheim Technologies, a business registered in Singapore under UEN 53534754E. In these terms, "we" and "us" mean Stutterheim Technologies. 1.2 "You" means the person who buys the Home Pack. 1.3 You can contact us at [email protected]. 2. YOUR RIGHTS UNDER THE LAW Nothing in these terms takes away or limits your rights under the Consumer Protection (Fair Trading) Act 2003, or any other right that the law says a contract cannot take away or limit. Where these terms and those rights differ, those rights apply. 3. WHAT YOU GET 3.1 The Home Pack is a download of Excel workbooks, reference PDFs and a README, for households in Singapore that employ a domestic helper. The Home Pack page at https://skeduladata.com/home/ describes what the pack calculates and what it does not. The README and the PDFs explain the detail. 3.2 We give you a licence to use the files you download for one household: your own, or the home where a helper you employ works, such as your parents' home. In these terms, "your household" means that household. You, and the people who live in it, may use the files for the people employed to work there, such as a domestic helper. The licence has no end date, except under clauses 8 and 12.2. 3.3 You may fill in the workbooks, save and print your copies, and keep backups. 3.4 The Home Pack is for personal household use only. It is not licensed for use in a business, sole proprietorship, employment agency or for anyone outside your household, and we owe no duty of care for any commercial or agency use. Skedula's business editions, under their own terms, are for those uses. 4. YOUR COVER PERIOD: DOWNLOADS AND UPDATES 4.1 Your purchase includes downloads and updates for the calendar year in which you buy. If you buy from October to December, it also includes the whole of the next calendar year. This is your "cover period". Dates follow Singapore time. A purchase is dated by the day in Singapore on which you start its checkout, even if your payment completes later. 4.2 You can download the pack from your account at https://skeduladata.com/portal/, during your cover period and after it ends (clause 4.5). 4.3 During your cover period, we update the pack when the law changes, or MOM or CPF Board changes a rule or rate, in a way that affects what the pack calculates. The updated files appear in your account. We aim to publish an update at least 30 days before the change takes effect. If the official details come out less than 44 days before the change, or after it, we aim to publish within 14 business days after they come out. These are aims, not guaranteed dates, because they depend on when the official details are published. 4.4 Updates cover the rules the pack already calculates. They do not add new calculations, although we may choose to add some. 4.5 After your cover period ends, you may keep using the files you downloaded, as clause 3.2 allows, and you can still download from your account, at any time, the pack for each calendar year your cover period included, except as clause 8 says. You do not get updates, or the pack for a later year, unless you buy the pack again. Each workbook covers only the periods its documentation states, so check that it covers the month you are working on. 5. PRICE, PAYMENT AND REMINDERS 5.1 You pay the price shown at checkout, in Singapore dollars. 5.2 The Home Pack is a one-off purchase, not a subscription. Nothing renews, and we never charge you again automatically. For updates in a later year, you can buy the pack again at the price shown then. 5.3 Before your cover period ends, we email you up to three reminders, in the November and December before it ends. Reminders are on by default, and the link in any reminder stops them all. 5.4 You buy the Home Pack directly from us by PayNow, and we give you the licence and are responsible for the pack. 5.5 The reminders in clause 5.3 are a courtesy: if one doesn't reach you, your purchase and its cover stay exactly as these terms describe. 6. 7-DAY REFUND, FOR ANY REASON 6.1 You can ask for a full refund for any reason within 7 days after you pay by emailing [email protected] from the email address you bought with. 6.2 Refunds are returned to your original payment method where our payment processor supports it, or otherwise by bank transfer to a Singapore bank account in your name. 7. IF THE PACK IS NOT AS DESCRIBED 7.1 The pack should work as described on the Home Pack page when you bought it and in these terms, subject to the scope, calculation assumptions and edge-case limits stated on that page and explained in the included README and PDFs. 7.2 If the pack is not as described, tell us at [email protected]. You may ask us to fix it or to give you a full refund, and you choose which. If you ask for a fix and we cannot make it within a reasonable time, we will give you a full refund. 7.3 You can ask at any time during your cover period. After it ends, your other rights under the law still apply. 8. WHAT A REFUND DOES 8.1 A full refund ends your licence and your access to the pack in your account. You must then delete the files and stop using them. 8.2 The same applies if your payment is reversed or otherwise returned. 9. NOT ADVICE, AND INDEPENDENT OF MOM 9.1 The pack gives reference calculations based on our reading of published rules. It is not legal, tax, payroll or accounting advice, and it does not replace that advice. 9.2 Rules can be read in different ways, and they change. The PDFs record how we read each rule, and any case where a result differs from a figure an agency has published. Please read those notes before you rely on a result they affect. 9.3 You are responsible for the figures you enter, for checking results before you use them, and for your own payments and dealings with MOM, CPF Board and other agencies. Official bills and notices from MOM and CPF Board govern what you must pay. The pack does not file, pay or submit anything for you. 9.4 Skedula is independent. It is not affiliated with, or approved or endorsed by, the Ministry of Manpower (MOM), CPF Board or any other government agency. Testing the pack against figures that agencies have published does not mean an agency has reviewed or approved it. 9.5 Statutory text and official figures are unofficial reproductions. Singapore legislation is subject to copyright of the Singapore Government and is used or reproduced with the permission of the Attorney-General's Chambers. Legislation Gazettes are subject to copyright of the Singapore Government and are reproduced with the permission of the Singapore Government. Check Singapore Statutes Online at sso.agc.gov.sg for the latest version of Singapore legislation, and egazette.gov.sg for the latest Gazettes. The official text is the version published in the Government Gazette. 10. LIABILITY 10.1 Nothing in these terms limits or excludes our liability for death or personal injury caused by negligence, for fraud, or for anything else that the law does not allow us to limit or exclude. 10.2 Apart from the cases in clause 10.1: (a) we are not liable for loss that we could not reasonably have foreseen when you bought the pack; (b) we are not liable for amounts you would have owed anyway, such as the levy, your helper's pay or CPF contributions; (c) apart from any refund due to you under clause 6.1 or clause 7.2, the most we will pay you for all claims connected with a purchase of the pack, added together, is S$1,000, whether a claim is for breach of these terms, negligence or anything else; and (d) we are not liable for any business, commercial, employment-agency or professional loss (including loss of profit, revenue, business, payroll penalties or client claims) arising from any use of the pack outside your household in breach of clause 3.4. 11. YOUR HELPER'S DETAILS, AND YOURS 11.1 The files work on your own device. They do not send us your helper's details or the figures you enter, and we do not receive them. Please do not send them to us, including in support emails. 11.2 We handle your own details, such as your email address and your order, as our Privacy Notice at https://skeduladata.com/privacy/ describes. 12. WHAT YOU MAY NOT DO 12.1 You must not: (a) sell, share, publish or give the pack, or a changed copy of it, to anyone outside your household; (b) remove the copyright, version or source notices in the files; or (c) use the pack to build a product or service that supplies calculation rules to others. Nothing in these terms stops you doing anything that the law says a contract cannot stop. 12.2 If you seriously break clause 3.4 or 12.1, we may end your licence by email. If the problem can be put right, we will first give you 14 days to put it right. When the licence ends, you must delete the files and stop using them. 13. SUPPORT During your cover period, you can email [email protected] with questions about using the pack. We aim to reply within 5 business days. We can explain how the pack works, but we cannot advise on your own situation. 14. OWNERSHIP 14.1 We and our licensors own the pack and the rights in it. You get only the rights these terms give you. 14.2 We claim no ownership of laws, government publications, or official rates and facts as such. 15. GENERAL 15.1 Our agreement. These terms, with the description of the pack in clause 7.1, make up our agreement about the Home Pack. This clause does not cancel or override anything we told you before you bought. 15.2 Changes. We may publish new versions of these terms at https://skeduladata.com/terms/. A new version applies only to purchases made after it is published. Your purchase keeps the version you accepted, and each version stays available at its own link. 15.3 Events outside our control. We are not responsible for delays caused by events we cannot reasonably control, such as an outage at a government, payment or hosting service. 15.4 Transfers. You may not transfer this agreement or the licence to anyone else. We may transfer this agreement (and all future obligations under it) to a company we set up, or to whoever takes over the Skedula business. We will tell you if we do, and your existing rights will not be reduced. 15.5 Other people. Only you and we can enforce these terms. No one else has a right to enforce them under the Contracts (Rights of Third Parties) Act 2001. 15.6 Keeping the rest. If a court decides that part of these terms cannot be enforced, the rest still applies. If we are slow to enforce a right, we still have it. 16. LAW AND DISPUTES 16.1 Singapore law governs these terms. 16.2 If something goes wrong, please email us first at [email protected], and we will try to put it right with you. 16.3 If we cannot settle it between us, you can ask the Consumers Association of Singapore (CASE) for help, or bring a claim in the Small Claims Tribunals or another Singapore court.
Master Licence Terms
SKEDULA MASTER LICENCE TERMS
Version 2.4 - Effective 22 November 2026
These Master Terms apply to every paid Skedula business edition, together with the Edition Schedule for
the edition bought. The Home Pack and the free evaluation pack have their own terms, and these Master
Terms do not apply to them.
1. WHO THIS AGREEMENT IS BETWEEN
1.1 The licensor is Stutterheim Technologies, a business registered in Singapore under UEN 53534754E
("Licensor"). Skedula is its product name.
1.2 The licensee is the business named at checkout ("Licensee"). The person accepting these terms
confirms that they have authority to bind that business.
1.3 Business editions are sold to businesses only. They are not sold to individuals acting for personal
or household purposes, including household employers of domestic workers. By buying a business edition,
Licensee confirms that it is acting in the course of business and that the name and registration number
it gave are correct. This clause does not apply to the Home Pack, which is sold to households and is
governed by the Skedula Home Pack Terms alone.
2. MEANINGS
"AI Assistant" means any application, agent, model or service that Licensee connects to the MCP Bundle,
such as Claude Desktop and the AI model behind it.
"AI Provider" means whoever provides an AI Assistant or the model behind it.
"Covered Programs" means the statutory programs listed in the Documentation for the Licensee's edition.
"Delivered Version" means a version of the Licensed Materials made available to Licensee during a paid
Licence Period.
"Documentation" means the reference PDFs, READMEs, interpretation notes, declared deviations, sources
and version information supplied with the Licensed Materials.
"Edition Schedule" means the schedule to these terms for the edition bought.
"Group Company" means an entity that controls, is controlled by, or is under common control with
Licensee, where control means owning more than 50% of the voting rights.
"Licence Period" has the meaning in clause 4.
"Licensed Materials" means everything supplied for the edition, including workbooks, formula models,
code, the MCP Bundle where the edition includes it, test vectors and Documentation.
"MCP Bundle" means the local Model Context Protocol server supplied as a .mcpb file, including its manifest,
licence texts and the server programs in it, which lets an AI Assistant call the Covered Programs as tools.
The third-party components listed in its THIRD_PARTY_LICENSES.txt remain under their own licences.
"Order" means the checkout record showing the edition, price and Licensee.
"Statutory Change" means a change to a Covered Program's rates, ceilings or rules that a Singapore
statute, subsidiary legislation or government agency publishes officially.
3. WHAT MAKES UP THE AGREEMENT
3.1 If documents conflict, the order of priority is: the Order, the Edition Schedule, these Master
Terms.
3.2 This agreement (comprising these Master Terms, the applicable Edition Schedule, and the published
description and documented assumptions for the Licensed Materials on the checkout page, pricing page and
included README or PDF documentation at the time of purchase) is the entire agreement between the parties
about the Licensed Materials. It supersedes earlier emails, marketing copy and informal statements not
included in those materials, and Licensee confirms it has not relied on any statement outside them.
Nothing in this clause limits or excludes any liability for fraud or fraudulent misrepresentation.
4. LICENCE PERIOD, RENEWAL AND CANCELLATION
4.1 Licences follow the calendar year in Singapore. A purchase from January to September covers that
calendar year. A purchase from October to December covers the rest of that year and the whole of the
next calendar year. That period, and each renewed calendar year, is a "Licence Period". A purchase is
dated by the day in Singapore on which its checkout was started, even if its payment completes later.
4.2 Card and wallet purchases are annual subscriptions, and so are upgrades and claims made by card in the
customer portal (clause 7). They renew automatically each 1 January for one calendar year at the price then
current, unless cancelled before that date. A purchase from October to December first renews on 1 January
of the second calendar year after purchase.
4.3 Licensor will give at least 30 days' notice of a price increase before it applies to a renewal.
4.4 Licensee may cancel renewal at any time through the subscription link in its Stripe receipt or by
emailing [email protected] at least 2 business days before renewal. Cancelling stops future renewals. It
does not end the current Licence Period or give a refund, except under clause 6.
4.5 PayNow purchases do not renew automatically, and nor do upgrades and claims made by PayNow in the
customer portal. Before the Licence Period of such a purchase, upgrade or claim ends, while nothing renews
its edition, Licensor will email Licensee up to three reminders, in the November and December before it
ends, unless Licensee has asked Licensor to stop reminders. A subscription Licensee cancels under clause 4.4
gets no reminders. Reminders are on by default, and the link in any reminder stops them all.
4.6 Licensor will email Licensee when it cancels a subscription, or sets it to end, because of a refund or
a payment dispute (clauses 5.5 and 6), unless Licensee had already cancelled its renewal under clause 4.4
or the refund is one under clause 7.11; when it cancels a subscription at an upgrade because its renewal
payment was outstanding (clause 7.4); and when it cannot switch a subscription back on after the upgrade
or claim that replaced it ends (clause 6.2). It does so while Licensee still holds a licence for that
edition for the current or a later calendar year, once nothing else renews that edition or reminds
Licensee of it, and it then sends the reminders under clause 4.5 that are still to come. A subscription
that a standing upgrade, or a purchase under clause 7.6, set to end is renewed or reminded in its place by
the new edition; if Licensee stops that, no notice is sent under this clause.
4.7 The reminders under clause 4.5, and the emails under clauses 4.6, 6.2, 7.9, 7.10 and 7.11, are a
courtesy. One that is not sent, or does not arrive, changes no licence, Licence Period or renewal, and no
right under these terms.
5. FEES, PAYMENT AND TAX
5.1 Prices are in Singapore dollars and are shown at checkout.
5.2 For card and wallet purchases, Stripe (or its designated group company acting as merchant of record,
such as Link) handles payment, tax collection and billing under its checkout terms, which apply to the
payment transaction. Licensor remains the licensor and contracting seller of the licence and is
responsible for the Licensed Materials.
5.3 For PayNow purchases, Licensor is the seller. Licensor is not registered for GST at the Effective
Date. If that changes, GST will be charged where required.
5.4 The licence depends on payment being received and not reversed.
5.5 Payment disputes. A card issuer's inquiry that takes no money back changes nothing. While a dispute
over a payment is open, downloads for what that payment paid for, including an upgrade or claim it was
credited to, are suspended, the payment gives no credit under clause 7.2, and the subscriptions concerned
are set not to renew. One whose renewal payment is still being collected when the dispute opens is
cancelled then, and that renewal is not charged; it does not renew again, whatever the dispute decides. If
the dispute is decided in Licensor's favour, so that the payment stands, the downloads and credit return
and those subscriptions renew again, unless one reached its renewal date meanwhile or another of Licensee's
subscriptions now renews its edition; clause 4.6 then applies. If it is decided against Licensor, the
payment is reversed, and clause 6.2 and clause 6.3 apply as they do to a full refund.
6. REFUNDS
6.1 Licensee may ask for a full refund of a payment for any reason within 7 days after that payment,
whether it was a first purchase, a renewal or an upgrade. Email [email protected], or use the Stripe
support option on the receipt for a card or wallet purchase. Where a PayNow payment can no longer be
refunded through Stripe (for example, more than 90 days after payment), Licensor will pay any valid refund
by bank transfer to a Singapore bank account nominated by Licensee in the same name as the payer.
6.2 A full refund of a first purchase or renewal ends the licence for the period that payment covered,
except a refund under clause 7.11, after which Licensee keeps that licence through the order that already
holds it. A full refund of an upgrade payment ends the upgraded edition, and a full refund of a payment
credited to an upgrade or a claim (clause 7.2) ends that upgrade or claim in the same way, and Licensor
tells Licensee. What is left of what Licensee paid for an upgrade ended this way, after any refund of that
payment itself, counts as credit under clause 7.2 towards that edition or one that includes it, in the
Licensing Cycle in which it was paid, or Licensor refunds it on request; nothing is left of a payment
refunded in full or taken back in a dispute. Each subscription that the ended upgrade or claim had set to
end renews again, unless it has already ended, Licensor has told Licensee under clause 4.6, after that
upgrade or claim was made, that it no longer renews, another of Licensee's subscriptions now renews its
edition, or its own payment has been refunded or taken back in a dispute; one whose own payment is in
dispute follows that dispute (clause 5.5). Where one does not renew again, clause 4.6 applies. Licensee
may reorder an earlier edition at the price then current. A partial refund granted solely as a billing
adjustment or discretionary goodwill credit does not end a licence: it only reduces the upgrade credit
available from that payment under clause 7.2. However, a pro-rated refund issued upon cancellation under
clause 8.5 or clause 13.3 ends the affected licence.
6.3 When a refund ends a licence, Licensee must delete the affected Licensed Materials and stop using
them; a refund under clause 7.11 ends none. Clause 10 does not apply to them. Licensor will also cancel
any linked subscription.
6.4 Refunds after 7 days are available where clause 6.2, 7.6, 7.9, 7.11, 8.5 or 13.3 provides for them, or
where the law requires them.
7. UPGRADES
7.1 Licensee may upgrade during its Licence Period, through the customer portal, to an edition that
includes every business edition Licensee holds, as the portal offers. The Complete SME Suite includes the
SME Packs, and two SME Packs make it (clause 7.10). The Corporate & BPO Edition and the SME SDK Edition
each include the Complete SME Suite and the SME Packs, but not each other. The Engineering SDK Edition
includes every other business edition.
7.2 Amounts paid in the current Licensing Cycle for the editions that the new edition includes are
credited in full, after deducting any refund, against its price. If the credit leaves less than S$0.50 to
pay, that remainder is waived. A Licensing Cycle runs from 1 October to the following 30 September. An
upgrade belongs to the Licensing Cycle in which its checkout was started: it is credited, covers and
renews as if it had been paid then.
7.3 Payments from an earlier Licensing Cycle are not credited.
7.4 An upgrade does not extend the Licence Period of the orders it credits. It takes effect from the
upgrade date, and the Edition Schedule for the new edition then applies. It replaces every subscription
bought with the account's email address for an edition the new edition includes: each is set to end at
its own renewal date and does not renew, and one whose renewal payment is still outstanding is cancelled
at once, so that it is not charged; if Stripe collects that payment anyway, Licensor refunds it. No upgrade
changes the price of an existing subscription.
7.5 Subject to 7.6 and 7.11, buying an edition that does not include every business edition Licensee
holds, such as the SME SDK Edition while holding the Corporate & BPO Edition, or the reverse, is a
separate purchase at its full price. It credits no earlier payment and does not replace Licensee's other
editions or their subscriptions.
7.6 A purchase made outside the customer portal, such as through a payment link on the website, is not an
upgrade, and no upgrade credit applies to it. Unless clause 7.11 refunds the purchase, if the edition
bought includes an edition Licensee already holds, a subscription for each included edition that Licensor
can match to the same buyer ends at the end of its current Licence Period and does not renew. For any
other such subscription, Licensor tells Licensee how to stop it; if Licensee did not receive that notice
and the subscription then renews, Licensor refunds that renewal on request, where clause 7.11 has not
refunded it already. An upgrade through the customer portal is the way to have earlier payments credited.
7.7 Paid by card, an upgrade starts a new annual subscription for the new edition, with the credit taken
off its first payment once, and it renews under clause 4.2 as a new purchase would. Paid by PayNow, it does
not renew, and clause 4.5 applies.
7.8 Where the credit covers the price, or leaves a remainder waived under clause 7.2, Licensee claims the
new edition with nothing to pay now. A claim by card starts an annual subscription whose first payment is
S$0 and which renews under clause 4.2. A claim by PayNow is granted at once, does not renew, and clause 4.5
applies. Either way, clause 7.4 applies to the subscriptions the claim replaces.
7.9 An upgrade or claim whose credit falls before it is completed, because a payment whose credit it used
was refunded in full or taken back in a dispute, or because another upgrade had already used that credit,
grants nothing, replaces nothing and does not renew, and Licensor tells Licensee. What is left of what
Licensee paid for such an upgrade, after any refund of that payment itself, counts as credit under clause
7.2 towards that edition or one that includes it, in the Licensing Cycle in which it was paid, or Licensor
refunds it on request.
7.10 Two SME Packs make the Complete SME Suite. Where Licensee holds licences for two different SME Packs
for the same calendar year, paid and neither refunded in full nor in a payment dispute, it holds the
Complete SME Suite for that year with nothing more to pay, and the Edition Schedule for the Complete SME
Suite applies to that year. Each pack keeps its own subscription and renews at its own price under clause
4.2, or, bought by PayNow, is reminded under clause 4.5. Licensee holds the suite for each year both packs
are paid for, and while both renew, the suite renews with them. If Licensee stops one, it keeps the other,
and the suite ends with the last year both were paid for. While a dispute over one of them is open, the
suite is suspended with it (clause 5.5). If a full refund, or a dispute decided against Licensor, takes
one away, the suite ends for the years it covered, and Licensor tells Licensee which packs it still holds.
What Licensee paid for the two packs is credited under clause 7.2 to an upgrade to an edition that
includes the Complete SME Suite; the Complete SME Suite itself is not offered as an upgrade for a year
this clause already gives it.
7.11 A purchase made outside the customer portal of a business edition that Licensee already holds for
every calendar year the purchase covers, whether by its own licence, through an edition that includes it,
or through two SME Packs under clause 7.10, adds nothing, and so does an upgrade that completes for such
an edition. Licensor refunds it in full, cancels any subscription it started, and tells Licensee; it
grants nothing and earns no credit. This applies, for example, to a third SME Pack while two packs make
the Complete SME Suite, to an SME Pack while Licensee holds the Complete SME Suite, and to the SME SDK
Edition while Licensee holds the Engineering SDK Edition. A purchase that covers a calendar year for which
Licensee does not yet hold that edition, such as one from October that reaches the next year (clause 4.1),
is kept. Each time a renewal is charged, Licensor decides, on the renewals and purchases charged for that
calendar year by then, which renewals are not needed to license what Licensee holds for that year, and
refunds them automatically, keeping the cheapest renewals that license the same; at equal cost, it refunds
fewer renewals, and then the ones charged later. A renewal refunded this way stays refunded, so the order
in which renewals are charged can decide which of them are kept. For this, Licensee holds an edition
through its own licence, an edition that includes it, or two SME Packs under clause 7.10, and a purchase
counts only for renewals charged after it. Licensor refunds each such renewal in full, cancels its
subscription, unless it has renewed since for a year that a later renewal still pays for, and tells
Licensee. It never refunds a purchase this way, nor a renewal that is credit
towards an upgrade or that an open upgrade checkout holds as credit. A payment in dispute is neither
refunded nor counted this way while the dispute is open; the renewals of its year are decided again once
the dispute ends with the payment standing, as they are when an upgrade that held a renewal as credit ends
or its checkout lapses unpaid. A purchase or renewal Licensor has decided to refund that is disputed
before the refund is made is refunded once the dispute ends with the payment standing; a dispute that
returns the payment leaves nothing more to refund. A renewal for a calendar year for which Licensee does
not otherwise hold that edition is kept.
8. STATUTORY UPDATES
8.1 During a paid Licence Period, Licensor will publish updates to the Covered Programs for Statutory
Changes in force in Singapore, through the customer portal.
8.2 Licensor's target is to publish an update at least 30 days before the change takes effect. If the
official publication comes less than 44 days before the change takes effect, or after it, the target is
within 14 business days after the official publication.
8.3 These are targets for Licensor's reasonable efforts. They are not guaranteed dates. Timing depends on
when and how official information is published.
8.4 New programs, new jurisdictions and new statutory schemes are not included unless Licensor chooses to
add them.
8.5 If Licensor misses the target for a Statutory Change that materially affects a Covered Program by more
than 30 days, Licensee may end the affected licence and receive a pro-rated refund of the fee for the
remaining days of the Licence Period (calculated on a daily basis from the date of cancellation notice).
Subject to clause 15.1, this is Licensee's only termination and refund remedy for a late update, and any
other claim is subject to clause 15.
9. SUPPORT
Licensor provides email support at [email protected] on using the Licensed Materials, on business days in
Singapore. The target first response is 3 business days for Corporate & BPO and Engineering SDK
licensees, and 5 business days for licensees of the SME SDK Edition and the other paid editions. The
Edition Schedule may limit what support covers. Support is not legal, tax, payroll or accounting advice.
It ends with the Licence Period and does not cover modified materials.
10. AFTER THE LICENCE PERIOD
10.1 When a Licence Period ends and is not renewed, Licensee may keep using the Delivered Versions it
already holds under the same Edition Schedule, without time limit.
10.2 This continuing right does not include updates, support or the warranty in clause 13. Licensee may
still download from the customer portal, at any time, its edition's files for each calendar year that a
Licence Period covered, unless the licence for that year ended under clause 6 or clause 11 or a dispute
over its payment is open (clause 5.5). For the SME SDK Edition, in a year that an Engineering SDK Edition
licence also covers, the same files come in the Engineering SDK Edition's download instead.
10.3 Delivered Versions will become out of date. Using them for later periods is at Licensee's own risk.
10.4 This clause does not apply if the licence ends under clause 6, clause 8.5, clause 11 or clause 13.3.
11. TERMINATION
11.1 Licensor may end the licence by written notice if Licensee:
(a) commits a material breach and does not fix it within 14 days of notice, where it can be fixed;
(b) commits a material breach that cannot be fixed; or
(c) reverses a payment or brings a payment dispute that is not resolved in Licensor's favour.
11.2 When the licence ends under this clause, Licensee must stop using and delete the Licensed Materials.
11.3 Licensee may keep archived copies of calculation results, workpapers and payroll records it must
retain by law. Software that Licensee has lawfully distributed to its own customers before termination
under an Engineering SDK licence may continue to run for those customers, unless the termination was for
a breach of the distribution restrictions.
11.4 Clauses that by their nature continue after termination will continue, including clauses 12, 14, 15,
16, 17 and 19.
12. RESTRICTIONS
Unless the Edition Schedule allows it, Licensee must not:
(a) sell, lease, sublicense, publish or distribute the Licensed Materials;
(b) remove copyright, attribution, version or source notices;
(c) make the Licensed Materials available to anyone outside the licensed scope; or
(d) use the Licensed Materials to build a product whose main purpose is to supply statutory calculation
logic, rule sets or test data to others.
Licensee may make reasonable backup copies. Using the MCP Bundle with an AI Assistant in the ordinary way,
which sends tool descriptions, rule explanations, inputs and results to the AI Provider, does not breach
paragraph (a) or (c). It does not allow Licensee to make the MCP Bundle, or an AI Assistant connected to
it, available to anyone outside the licensed scope. Nothing in this agreement restricts anything that
mandatory applicable law says a contract cannot restrict (including section 187 of Singapore's Copyright
Act 2021).
13. LIMITED WARRANTY AND ITS REMEDY
13.1 Licensor warrants that, during the paid Licence Period, an unmodified Delivered Version will perform
materially as its Documentation describes, for the Covered Programs and the periods the Documentation
states.
13.2 The warranty does not cover modified materials, incorrect inputs, use outside the Documentation,
experimental components, or matters declared in the Documentation as interpretation notes, known
deviations or limitations. For the MCP Bundle, the warranty applies only to the results the MCP Bundle
returns, and not to what an AI Assistant does with them or to whether a particular operating system, AI
Assistant or device policy allows the MCP Bundle to be installed or run.
13.3 If Licensee reports a breach of this warranty during the Licence Period, Licensor will correct the
Delivered Version within a reasonable time. If it cannot, Licensee may end the licence and receive a
pro-rated refund of the fee for the remaining days of the Licence Period (calculated on a daily basis from
the date of the breach report). Subject to clause 15.1, this is Licensee's only termination and refund
remedy for a breach of this warranty, and any other claim is subject to clause 15.
13.4 Except for clause 13.1, and to the extent the law allows, all warranties, conditions and terms implied
by statute, custom or otherwise are excluded. Licensor does not warrant that the Licensed Materials are
error free, fit every factual situation, or will avoid any claim, penalty, audit finding or regulatory
action.
14. REFERENCE TOOL, NOT ADVICE
14.1 The Licensed Materials are reference calculations and verification tools based on Licensor's reading
of published rules. They are not legal, tax, payroll or accounting advice, and they do not replace that
advice.
14.2 The law can be read in different ways and can change. The Documentation records interpretation notes
and known deviations, including cases where a calculation departs from a figure an agency has published.
Licensee must read those notes before relying on the affected calculation.
14.3 Licensee is responsible for its inputs, for checking results before use, for its filings and payments,
and for its compliance with the law.
14.4 Statutory text and official figures are unofficial reproductions. Singapore legislation is subject to
copyright of the Singapore Government and is used or reproduced with the permission of the Attorney-General's
Chambers. Legislation Gazettes are subject to copyright of the Singapore Government and are reproduced with
the permission of the Singapore Government. Check Singapore Statutes Online at sso.agc.gov.sg for the latest
version of Singapore legislation, and egazette.gov.sg for the latest Gazettes. The official text is the
version published in the Government Gazette.
14.5 Skedula is independent. It is not affiliated with, or approved or endorsed by, CPF Board, the Ministry
of Manpower, the Inland Revenue Authority of Singapore or any other government agency. Testing against
published agency figures does not mean an agency has reviewed or approved it.
14.6 The MCP Bundle returns the result of one Covered Program for the inputs an AI Assistant sends it.
The AI Assistant chooses the programs and the inputs, may combine results, and may state things that no
program returned. Anything an AI Assistant says or produces, including a figure it combined, restated or
inferred, is not a calculation by the Licensed Materials and may contain errors. Licensee must check it
before relying on it, for example against the workbooks, reference PDFs and sources that each result names.
15. LIABILITY
15.1 Nothing in this agreement limits or excludes liability for death or personal injury caused by
negligence, for fraud or fraudulent misrepresentation, or for anything else that cannot legally be limited
or excluded.
15.2 Subject to clause 15.1, Licensor is not liable for any of the following, each of which operates as a
separate and independent exclusion:
(a) any indirect, special or consequential loss or damage;
(b) any loss of profit, loss of revenue, loss of business, loss of anticipated savings, or loss of goodwill
(whether direct or indirect); or
(c) any loss or corruption of data.
15.3 Subject to clause 15.1, Licensor is not liable for:
(a) any statutory amount, salary, wage, levy, contribution or tax that Licensee would have owed in any
event; or
(b) any regulatory fine, penalty, surcharge or statutory late-payment interest, given Licensee's
responsibility under clause 14 to verify figures and check official agency assessments.
15.4 Subject to clause 15.1, Licensor's total aggregate liability for all claims arising from events in a
Licence Period (and for any single root defect or related series of events spanning more than one Licence
Period), whether in contract, tort (including negligence), breach of statutory duty, misrepresentation or
otherwise, is limited to the greater of S$1,000 and the net fees actually paid by Licensee (excluding any
amounts refunded) for the Licence Period in which the claim first arose (or, if after the final Licence
Period, the final Licence Period).
15.5 The prices reflect these limits. Licensee can evaluate the historical free pack before buying and has
its own opportunity to check every result.
15.6 Subject to clause 15.1, Licensor is not liable for what an AI Assistant says or does, or for how an AI
Provider handles data it receives.
16. OWNERSHIP
16.1 Licensor and its licensors own the Licensed Materials and all intellectual property rights in them.
Licensee receives only the rights stated in this agreement.
16.2 Licensor claims no ownership of statutes, subsidiary legislation, government publications or other
third-party materials, or of statutory rates and facts as such. They remain subject to their owners' rights
and terms.
16.3 Licensee may give feedback, and Licensor may use it without restriction or payment.
16.4 Licensor may ask Licensee to confirm in writing that its use complies with the licensed scope. Licensee
will answer within 14 days.
17. DATA
17.1 The workbooks, SDKs and MCP Bundle run in Licensee's own environment. They do not send employee or
payroll data to Licensor. The MCP Bundle makes no network connections of its own and writes no payroll
data to disk. Licensee must not send such data to Licensor, including in support requests.
17.2 When Licensee uses the MCP Bundle, the AI Assistant passes the inputs it gives the tools, and the
results they return, through the AI Provider's service. That data leaves Licensee's environment and is
handled under the AI Provider's terms, not this agreement. Licensor does not receive it and is not
responsible for it. Licensee decides whether to use an AI Assistant, which one, and what data to give it.
The tools ask for no names or identification numbers, and Licensee should not give them to the AI
Assistant.
17.3 Licensee is responsible for its own compliance with the Personal Data Protection Act 2012, including
when it gives personal data to an AI Provider and where that data is transferred outside Singapore.
17.4 Licensor handles account and billing information as described in its Privacy Notice at
https://skeduladata.com/privacy/.
18. TRANSFERS
18.1 Licensee must not transfer this agreement or the licence without Licensor's written consent, except to
a successor to the whole of the licensed business after giving written notice. The successor must accept
this agreement and must not be a supplier of a competing product.
18.2 A change of control of Licensee does not need consent, but Licensee must notify Licensor within 30 days
if the new controller is such a supplier. Licensor may then end future updates and renewals.
18.3 Licensor may transfer this agreement (and all future obligations under it) to a company it
incorporates, or to a successor to the Skedula business, by giving notice.
19. GENERAL
19.1 Changes. Licensor may publish new versions of these terms at https://skeduladata.com/terms/. A new
version applies from the next renewal after at least 30 days' notice. The version in force at the start of a
Licence Period applies to that period. Each version stays available at its versioned link.
19.2 Events outside control. Neither party is liable for delay caused by events beyond its reasonable
control, including a government, payment or hosting outage. This does not excuse an obligation to pay.
19.3 Notices. Notices to Licensor go to [email protected]. Notices to Licensee go to the email address on the
Order or customer account.
19.4 Third parties. A person who is not a party has no right under the Contracts (Rights of Third Parties)
Act 2001 to enforce this agreement.
19.5 Severance and waiver. If a term is unenforceable, the rest continues. A delay in enforcing a right is
not a waiver.
19.6 Law and courts. Singapore law governs this agreement and any non-contractual claim connected with it.
The Singapore courts have exclusive jurisdiction.
Schedule: SME Pack
SKEDULA EDITION SCHEDULE: SME PACK Version 2.4 - Effective 22 November 2026 Licensor: Stutterheim Technologies (UEN 53534754E) This Schedule forms part of the Skedula Master Licence Terms, which apply to it in full. 1. GRANT Licensor grants Licensee a non-exclusive, non-transferable licence to use the Licensed Materials for the SME Pack it bought, for its own internal purposes. The SME Packs are the Monthly Payroll Pack, the Year-End & Leavers Pack and the Foreign Workers & PWM Pack. The Licensed Materials are the workbooks, formula models, reference PDFs and other files in that Pack's download. An SME Pack does not include the MCP Bundle. 2. WHO AND WHAT IS COVERED (a) Entity: one legal entity with one Singapore Unique Entity Number (UEN). (b) Size: up to 200 employees on that entity's payroll when the Licence Period starts. If the entity goes over 200 employees during a Licence Period, the licence continues for that period, and it must move to the Corporate & BPO Edition at its next renewal. (c) Users: the entity's employees and individual contractors who work on the entity's own payroll, HR, tax or finance may use the Licensed Materials for that work. The number of such people is not limited. (d) Reviewers: the entity's external auditors and professional advisers may review the workbooks and results for that entity. They are not users under (c). 3. PERMITTED CHANGES Licensee may fill in, copy and adapt workbooks and formulas for its own internal use, including copying formulas into its own internal spreadsheets. It may also keep backups. Modified materials are outside the warranty and support. 4. RESTRICTIONS Licensee must not use the Licensed Materials: (a) to provide payroll, bureau, accounting, tax or advisory services to anyone else, which requires the Corporate & BPO Edition; (b) by copying their formulas or logic into code or software other than spreadsheets, which for its own payroll, HR, tax and finance work requires the SME SDK Edition or the Engineering SDK Edition; or (c) in software supplied to others or in a hosted or multi-tenant service for others, which requires the Engineering SDK Edition.
Schedule: Complete SME Suite
SKEDULA EDITION SCHEDULE: COMPLETE SME SUITE Version 2.4 - Effective 22 November 2026 Licensor: Stutterheim Technologies (UEN 53534754E) This Schedule forms part of the Skedula Master Licence Terms, which apply to it in full. 1. GRANT Licensor grants Licensee a non-exclusive, non-transferable licence to use the Licensed Materials for the Complete SME Suite, for its own internal purposes. The Licensed Materials are the workbooks, formula models, rules reference book, reference PDFs, MCP Bundle and other files in the Complete SME Suite download. 2. WHO AND WHAT IS COVERED (a) Entity: one legal entity with one Singapore Unique Entity Number (UEN). (b) Size: up to 200 employees on that entity's payroll when the Licence Period starts. If the entity goes over 200 employees during a Licence Period, the licence continues for that period, and it must move to the Corporate & BPO Edition at its next renewal. (c) Users: the entity's employees and individual contractors who work on the entity's own payroll, HR, tax or finance may use the Licensed Materials for that work, including by installing the MCP Bundle on the devices they use for it. The number of such people is not limited. (d) Reviewers: the entity's external auditors and professional advisers may review the workbooks and results for that entity, including answers obtained through an AI Assistant. They are not users under (c), and they may not use an AI Assistant connected to the MCP Bundle themselves. 3. PERMITTED CHANGES Licensee may fill in, copy and adapt workbooks and formulas for its own internal use, including copying formulas into its own internal spreadsheets. It may also keep backups. Modified materials are outside the warranty and support. 4. RESTRICTIONS Licensee must not use the Licensed Materials: (a) to provide payroll, bureau, accounting, tax or advisory services to anyone else, which requires the Corporate & BPO Edition; (b) by copying their formulas or logic into code or software other than spreadsheets, which for its own payroll, HR, tax and finance work requires the SME SDK Edition or the Engineering SDK Edition; (c) in software supplied to others or in a hosted or multi-tenant service for others, which requires the Engineering SDK Edition; or (d) by connecting the MCP Bundle to an AI Assistant, agent or service that people other than those in 2(c) can use.
Schedule: SME SDK Edition
SKEDULA EDITION SCHEDULE: SME SDK EDITION
Version 2.4 - Effective 22 November 2026
Licensor: Stutterheim Technologies (UEN 53534754E)
This Schedule forms part of the Skedula Master Licence Terms, which apply to it in full.
1. GRANT
Licensor grants Licensee a non-exclusive, non-transferable licence to use the Licensed Materials for the SME
SDK Edition as this Schedule allows. Under clause 10 of the Master Terms, the licence to Delivered Versions
continues after the Licence Period ends. Updates and support are provided only during a paid Licence Period.
2. WHAT IS INCLUDED
(a) Production SDK Code: the generated code and runtime libraries for TypeScript, Python, PHP, Java, C#, C, C++,
Rust and Haskell.
(b) Experimental COBOL Code: the code in sdk/cobol/, which the COBOL Schedule governs.
(c) Test Materials: the conformance test vectors and any test harnesses.
(d) Reference Materials: the Excel reference workbooks, formula models and PDF documentation.
(e) MCP Bundle: the MCP Bundle, in compiled form only.
(f) Suite Materials: the workbooks, formula models, rules reference book and reference PDFs in the downloads of
the Complete SME Suite and the SME Packs, which this edition includes. They are not Reference Materials.
3. WHO MAY USE IT
Licensee and its Group Companies may use the Licensed Materials. Their contractors may also do so, only for Own
Payroll Work done for Licensee or its Group Companies, under written confidentiality obligations. Licensee is
responsible for their compliance. The external auditors and professional advisers of Licensee and its Group
Companies may review the Suite Materials and the results of Own Payroll Work, but may not otherwise use the
Licensed Materials.
4. OWN PAYROLL ONLY
(a) The Licensed Materials may be used only for the Singapore payroll of Licensee and its Group Companies, and
the HR, tax and finance work that goes with it ("Own Payroll Work").
(b) Production SDK Code may be run in systems and services used only for Own Payroll Work, with no royalty per
employee or transaction.
(c) Licensee must not distribute Production SDK Code, or code built or derived from it, to anyone other than
Licensee, its Group Companies and their contractors (solely for Licensee's internal systems), in source, compiled,
bundled or any other form. It must not be part of a product or service that Licensee supplies to others (a
"Licensee Product"). In particular, the TypeScript Production SDK Code (and any JavaScript, WebAssembly or
client-executable code compiled, transpiled or derived from it or from any other Production SDK Code) must execute
solely on Licensee-controlled backend servers (such as server-hosted Node.js, Deno, Bun, serverless functions and
internal backend APIs) and must not be included, bundled or served in any browser bundle, web frontend (whether
public or internal), downloadable web asset, desktop or mobile app container (such as Electron, Tauri, Capacitor
or React Native), WebView or browser-executed WebAssembly, or exposed with source maps (.map).
(d) Licensee must not use the Licensed Materials, or anything built from them, to provide payroll, bureau,
accounting, tax or advisory services, or a hosted, multi-tenant or API service, to anyone other than Licensee
and its Group Companies, including clients and tenants.
(e) Shipping Production SDK Code, or running it for clients, requires the Engineering SDK Edition. Using the
workbooks for clients requires the Corporate & BPO Edition or the Engineering SDK Edition.
5. MODIFICATION
Licensee may modify Production SDK Code for use under this Schedule. Licensee owns its own modifications, subject
to Licensor's rights in the underlying code. Licensee may also fill in, copy and adapt the Suite Materials for
Own Payroll Work, including copying formulas into its own spreadsheets, and may keep backups. Modified code and
materials are used at Licensee's own risk and are outside the warranty and support.
6. TEST, REFERENCE AND MCP MATERIALS
Test Materials are for development, testing and continuous integration for Own Payroll Work only. Reference
Materials may be used for Own Payroll Work, including development, testing and continuous integration. Both are
confidential. Licensee may keep them in private repositories. Licensee must not publish them, share them with
anyone other than Licensee, its Group Companies and their contractors, or ship them in any product.
Licensee, its Group Companies and their contractors may use the MCP Bundle with an AI Assistant for Own Payroll
Work only. The MCP Bundle is not Production SDK Code, and section 4(b) does not apply to it. Licensee must not
ship it in any product, distribute it, run it as a service for others, or connect it to an AI Assistant, agent
or service that anyone other than Licensee, its Group Companies and their contractors can use. Anything
Licensee builds from the Production SDK Code is governed by sections 4 and 7.
7. RESTRICTIONS
Licensee must not:
(a) offer the Licensed Materials, or a thin wrapper around them, as a stand-alone library, SDK, rule set,
calculation API or developer tool whose main purpose is to supply statutory calculation logic to others;
(b) publish Production SDK Code, Test Materials or generated rule sources in any public or open-source repository;
or
(c) remove or alter copyright, attribution, version or source notices in the code.
8. OTHER LANGUAGES AND CERTIFICATION
Language bindings outside section 2, and any certification or conformance statement for a Licensee Product, need
a separate written agreement.
9. SUPPORT
Licensor provides email support under clause 9 of the Master Terms, with a target first response of 5 business
days. It covers the rules and how the Licensed Materials behave, such as whether a result is right, what a
status means, which program answers a question, or a suspected defect. It is not integration support: it does
not cover writing, reviewing or debugging Licensee's own code, connecting the Licensed Materials to the systems
of Licensee or its Group Companies, phone or video calls, filing with any agency for Licensee, or handling
Licensee's credentials or employee data.
Schedule: Corporate & BPO Edition
SKEDULA EDITION SCHEDULE: CORPORATE & BPO EDITION Version 2.4 - Effective 22 November 2026 Licensor: Stutterheim Technologies (UEN 53534754E) This Schedule forms part of the Skedula Master Licence Terms, which apply to it in full. 1. GRANT Licensor grants Licensee a non-exclusive, non-transferable licence to use the Licensed Materials for the Corporate & BPO Edition for the purposes in section 2. The Licensed Materials are the workbooks, formula models, rules reference book, reference PDFs, MCP Bundle and other files in the edition's download. 2. WHO AND WHAT IS COVERED (a) Own payroll: Licensee and its Group Companies may use the Licensed Materials for their own payroll, HR, tax and finance work, with no limit on employees or entities. (b) Client work: Licensee and its Group Companies may use the Licensed Materials to provide payroll, accounting, tax, corporate services and advisory work to an unlimited number of external clients. (c) Users: there is no limit on the employees and individual contractors of Licensee and its Group Companies who use the Licensed Materials for those purposes. Licensee is responsible for their compliance. (d) Independent firms: a separate firm in a network, or a firm that is not a Group Company, needs its own licence. 3. CLIENT DELIVERABLES Licensee may give clients, auditors and regulators outputs of the work, including payroll reports, calculation traces, schedules and static workpapers. Licensee may disclose a workbook or formula to a client's auditor or a regulator only where that is reasonably needed to support a specific piece of work. An answer produced by an AI Assistant is not a calculation by the Licensed Materials (clause 14.6 of the Master Terms), and Licensee is responsible for any such answer it gives a client. Licensee is responsible for its duties to clients when it gives client data to an AI Provider. 4. PERMITTED CHANGES Licensee may fill in, copy and adapt workbooks and formulas for the purposes in section 2. It may also keep backups. Modified materials are outside the warranty and support. 5. RESTRICTIONS Licensee must not: (a) give clients or other third parties the workbooks or formulas as working files or as stand-alone products, except as section 3 allows; (b) copy the formulas or logic of the Licensed Materials into code or software other than spreadsheets, which for its own payroll, HR, tax and finance work under 2(a) requires the SME SDK Edition or the Engineering SDK Edition, and for client work under 2(b) requires the Engineering SDK Edition; (c) put the Licensed Materials in software supplied to others or in a hosted or multi-tenant service for others, which requires the Engineering SDK Edition; or (d) give clients or other third parties the MCP Bundle, or access to an AI Assistant connected to it. 6. CLIENT RESPONSIBILITY AND INDEMNITY Licensee is solely responsible to its clients for all payroll calculations, advice, filings, submissions and services provided using the Licensed Materials, and must make clear to clients that Licensor provides no legal, tax or payroll advice and owes no duty or liability to Licensee's clients (to the extent permitted by law). Licensee shall indemnify and hold harmless Licensor against any claim, loss, penalty or reasonable legal cost brought by a client of Licensee or any employee of that client arising out of Licensee's payroll or advisory services (except to the extent directly caused by Licensor's fraud or wilful default).
Schedule: Engineering SDK Edition
SKEDULA EDITION SCHEDULE: ENGINEERING SDK EDITION Version 2.4 - Effective 22 November 2026 Licensor: Stutterheim Technologies (UEN 53534754E) This Schedule forms part of the Skedula Master Licence Terms, which apply to it in full. 1. GRANT Licensor grants Licensee a non-exclusive, non-transferable, worldwide licence to use the Licensed Materials for the Engineering SDK Edition as this Schedule allows. Under clause 10 of the Master Terms, the licence to Delivered Versions continues after the Licence Period ends. Updates and support are provided only during a paid Licence Period. 2. WHAT IS INCLUDED (a) Production SDK Code: the generated code and runtime libraries for TypeScript, Python, PHP, Java, C#, C, C++, Rust and Haskell. (b) Experimental COBOL Code: the code in sdk/cobol/, which the COBOL Schedule governs. (c) Test Materials: the conformance test vectors and any test harnesses. (d) Reference Materials: the Excel reference workbooks, formula models and PDF documentation. (e) MCP Bundle: the MCP Bundle, in compiled form only. (f) Included Edition Materials: the workbooks, formula models, rules reference book and reference PDFs in the downloads of the Corporate & BPO Edition, the Complete SME Suite and the SME Packs, which this edition includes. Licensee may use them as the Corporate & BPO Edition Schedule allows, including its use for clients. They are not Reference Materials. This edition also includes the SME SDK Edition, whose download holds the same files as this edition's, so it is not supplied separately: Licensee may also use the Licensed Materials in (a) to (e) as the SME SDK Edition Schedule allows. 3. WHO MAY USE IT Licensee and its Group Companies may use the Licensed Materials. Their contractors may also do so for that work, under written confidentiality obligations. Licensee is responsible for their compliance. 4. EMBEDDING AND DISTRIBUTION (a) Licensee may embed Production SDK Code in Licensee Products and run it in internal services, APIs and hosted services, with no royalty per employee, transaction or tenant. A "Licensee Product" is a product or service with substantial functionality of its own beyond the Production SDK Code. (b) Licensee may distribute Production SDK Code to customers and tenants only as compiled or linked binary components forming part of a Licensee Product where the language allows (or, solely where an interpreted server-side language requires source files at runtime, on Licensee-controlled servers only), and must never publish or distribute Production SDK Code separately. Despite the foregoing, the TypeScript Production SDK Code (and any JavaScript, WebAssembly or other client-executable code compiled, transpiled or derived from it or from any other Production SDK Code) is licensed strictly for execution on remote, Licensee-controlled backend servers (such as server-hosted Node.js, Deno, Bun, serverless functions and cloud APIs). Licensee must not bundle, embed, serve, compile or distribute it into any client-side browser code, web frontend, downloadable web asset, mobile application, desktop or hybrid application container (including Electron, Tauri, Capacitor or React Native), WebView, edge-delivered client script or browser-executed WebAssembly, and must not expose or serve source maps (.map) or readable source files to any end-user device, without Licensor's prior written agreement. (c) Licensee's customer terms must prohibit extraction, copying and redistribution of any Production SDK Code, must state that the Licensee Product is not legal, tax, accounting or payroll advice, and must exclude Licensor's liability to the maximum extent permitted by applicable law (including an express right for Licensor to enforce that exclusion under the Contracts (Rights of Third Parties) Act 2001 or equivalent law, without limiting liability where the law does not allow). (d) Licensee is solely responsible for its Licensee Products, its own outputs and filings, and its customers. Licensee shall indemnify and hold harmless Licensor against all third-party claims, damages, penalties, regulatory costs and reasonable legal costs arising from any Licensee Product, any customer's or end-user's use of it, or any breach by Licensee of section 4(c) or section 7 (except to the extent directly caused by Licensor's fraud or wilful default). 5. MODIFICATION Licensee may modify Production SDK Code for use under this Schedule. Licensee owns its own modifications, subject to Licensor's rights in the underlying code. Modified code is used at Licensee's own risk and is outside the warranty and support. 6. TEST, REFERENCE AND MCP MATERIALS Test Materials and Reference Materials are for internal development, testing and continuous integration only. They are confidential. Licensee may keep them in private repositories. Licensee must not publish them, share them outside section 3, or ship them in a Licensee Product. The people in section 3 may use the MCP Bundle with an AI Assistant for Licensee's own work, including building, testing and supporting commercial Licensee Products. The MCP Bundle is not Production SDK Code, and section 4 does not apply to it: Licensee must not ship it in a Licensee Product, distribute it, or run it as a service for customers, tenants or other third parties. Anything Licensee builds from the Production SDK Code is governed by sections 4 and 7. 7. RESTRICTIONS Licensee must not: (a) offer the Licensed Materials, or a thin wrapper or proxy API around them (including any public web calculator, calculation microservice, formula lookup endpoint or third-party-facing MCP tool/server), as a stand-alone library, SDK, rule set, calculation API, public calculator or developer tool whose primary value or function is to expose statutory calculation outputs without substantial surrounding payroll, HR, workforce or finance workflow features (such as employee records, payroll runs, payslip generation, ledgering or compliance workflows); (b) publish Production SDK Code, Test Materials or generated rule sources in any public or open-source repository; (c) remove or alter copyright, attribution, version or source notices in the code; or (d) include, bundle, embed, serve, compile or distribute TypeScript Production SDK Code (or any JavaScript, WebAssembly or other client-executable code compiled, transpiled or derived from it or from any other Production SDK Code) in any client-side browser code, web frontend (whether public or internal), downloadable web asset, mobile app, desktop or hybrid application container (such as Electron, Tauri, Capacitor or React Native), WebView or browser-executed WebAssembly, or expose or serve source maps (.map) or raw source files for it to any client device, without Licensor's prior written agreement. A payroll, HR, workforce or finance product that uses the Production SDK Code to deliver substantial workflow features of its own is not a breach of section 7(a). 8. OTHER LANGUAGES AND CERTIFICATION Language bindings outside section 2, and any certification or conformance statement for a Licensee Product, need a separate written agreement.
Schedule: COBOL Experimental Target
SKEDULA EDITION SCHEDULE: COBOL EXPERIMENTAL TARGET
Version 2.4 - Effective 22 November 2026
Licensor: Stutterheim Technologies (UEN 53534754E)
This Schedule forms part of the Skedula Master Licence Terms and supplements the Edition Schedule for the
Engineering SDK Edition or the SME SDK Edition, whichever Licensee holds. It applies to the code in sdk/cobol/
("COBOL Code") and prevails over them for that code. Their terms apply to the COBOL Code except where this
Schedule differs.
1. GRANT AND MODIFICATION
Licensee and its Group Companies (and their individual contractors solely for those systems, under section 3
of the accompanying SDK Edition Schedule) may use and modify the COBOL Code in their own systems, for the
uses the accompanying SDK Edition Schedule allows. Licensee must not distribute the COBOL Code to anyone
else, including as part of a Licensee Product.
2. DURATION
The COBOL Code follows the same rule as the rest of the edition Licensee holds. Under clause 10 of the Master
Terms, the licence to Delivered Versions continues after the Licence Period ends.
3. EXPERIMENTAL STATUS
The COBOL Code is experimental and is provided as is. It is tested with GnuCOBOL in IBM-strict mode.
Production use is at Licensee's own risk.
4. WARRANTY, UPDATES AND SUPPORT
Clause 13.1 of the Master Terms does not apply to the COBOL Code, and the rest of clause 13 applies as if no
warranty were given. Clauses 8 and 9 of the Master Terms do not apply to it. Licensor may provide updates or
support for it, but has no obligation to do so.
5. LIABILITY
Clause 15 of the Master Terms applies. Fees paid for the edition Licensee holds are used to calculate the limit.
6. JOINT WORK
Any paid support, and the ownership of code developed jointly by Licensor and Licensee, requires a separate written
agreement.
Free Evaluation Pack Terms
SKEDULA FREE EVALUATION PACK TERMS
Version 2.4 - Effective 22 November 2026
Copyright (c) 2026 Stutterheim Technologies (UEN 53534754E). All rights reserved.
These terms are between you and Stutterheim Technologies, a business registered in Singapore ("Licensor").
Downloading, opening or using the Skedula Free Evaluation Pack ("Pack") means you accept them. If you accept for an
organisation, you confirm that you may bind it.
1. WHAT YOU MAY DO
Licensor grants you a free, non-exclusive, non-transferable licence, which Licensor may revoke, to download and run
the Pack, including the MCP server bundle in it, for internal use to:
(a) evaluate Skedula;
(b) reconcile and review past payroll for the historical periods the Pack covers; and
(c) compare your own, or your employer's or client's, payroll system against it, as long as the Pack stays with you.
The Pack covers historical periods only, as stated in its Documentation. It is not licensed for running current or
future payroll.
2. WHAT YOU MAY NOT DO
You must not:
(a) sell, lease, sublicense, distribute, publish or publicly display the Pack or any modified copy;
(b) remove copyright, attribution, version or source notices; or
(c) use the Pack to build a product whose main purpose is to supply statutory calculation logic, rule sets or test
data to others.
Nothing in these terms restricts anything that the law says a contract cannot restrict.
3. NOT ADVICE
The Pack contains reference calculations based on Licensor's reading of published rules. It is not legal, tax, payroll
or accounting advice. The Pack's documentation records interpretation notes and known deviations, including cases
where a calculation departs from a figure an agency has published. You are responsible for your inputs and for checking
results. If you connect the Pack's MCP server to an AI assistant, the assistant chooses the programs and inputs and may
combine results. Anything it says or produces is not a calculation by the Pack and may contain errors, and you must
check it before relying on it, for example against the workbooks, reference PDFs and sources each result names.
Skedula is not affiliated with, or approved or endorsed by, any government agency. Singapore legislation is
subject to copyright of the Singapore Government and is used or reproduced with the permission of the Attorney-General's
Chambers. Legislation Gazettes are subject to copyright of the Singapore Government and are reproduced with the
permission of the Singapore Government. Check Singapore Statutes Online at sso.agc.gov.sg for the latest version of
Singapore legislation, and egazette.gov.sg for the latest Gazettes.
4. AI ASSISTANTS AND YOUR DATA
The Pack does not send payroll data to Licensor. Its MCP server makes no network connections of its own and
writes no payroll data to disk. When you use it, your AI assistant passes the inputs and results, with the tool
descriptions and rule explanations, through your AI provider's service. That data leaves your environment and is
handled under your provider's terms. Licensor does not receive it and is not responsible for it. Doing this does
not breach section 1(c) or 2(a), but you must not make the MCP server, or an AI assistant connected to it,
available to others. You are responsible for your compliance with the Personal Data Protection Act 2012.
5. NO WARRANTY
THE PACK IS PROVIDED FREE OF CHARGE AND "AS IS". TO THE EXTENT THE LAW ALLOWS, ALL WARRANTIES AND IMPLIED TERMS ARE
EXCLUDED.
6. LIABILITY
TO THE EXTENT THE LAW ALLOWS, LICENSOR IS NOT LIABLE FOR ANY LOSS ARISING FROM THE PACK. NOTHING IN THESE TERMS LIMITS
LIABILITY FOR DEATH OR PERSONAL INJURY CAUSED BY NEGLIGENCE, FOR FRAUD, OR FOR ANYTHING ELSE THAT CANNOT LEGALLY BE
LIMITED OR EXCLUDED.
7. OWNERSHIP
Licensor and its licensors own the Pack. Licensor claims no ownership of statutes, government publications, or statutory
rates and facts as such.
8. ENDING THIS LICENCE
This licence ends if you breach these terms or Licensor revokes it. You must then delete the Pack.
9. LAW AND COURTS
Singapore law governs these terms. The Singapore courts have exclusive jurisdiction. A person who is not a party has no
right to enforce these terms under the Contracts (Rights of Third Parties) Act 2001.